ACV Roof Policy Step by Step Guide for Texas Property Owners
A property owner guide from Showtime Exteriors

An ACV roof policy can leave a Texas property owner with a substantial share of a roof replacement bill. Understanding that exposure before signing a construction contract helps you decide what work is necessary, what the insurer has actually agreed to pay, and how much money you need to contribute.
ACV stands for actual cash value. The basic concept is replacement cost reduced by depreciation, with the deductible and any applicable policy adjustments affecting the final payment. The critical question is whether your roof is insured on an ACV-only basis or whether you are receiving an initial ACV payment under replacement cost coverage. Those situations can look similar on the first estimate but lead to different final budgets. [1, 2]
This guide explains how to read your roof settlement, document conditions, compare construction estimates, and move from inspection to completed work. It is intended for Texas property owners, with particular attention to warehouses, retail centers, offices, and other commercial buildings. Homeowners can use the same budgeting approach, but residential and commercial policy provisions are not interchangeable.
Showtime Exteriors can help you understand the physical condition of your roof and develop a construction scope. Coverage interpretation, claim representation, and legal disputes belong with the appropriate insurance professional or attorney. The purpose of this article is to help you ask better questions and make an informed roofing decision.
What an ACV roof policy means
Actual cash value describes a way of valuing a covered loss. It does not, by itself, establish that a storm caused the damage or that your policy covers the event. You still need to understand the covered causes of loss, exclusions, roof endorsements, and applicable limits before estimating what the carrier might pay.
A roof endorsement can change the settlement terms for roof surfaces even when other parts of a building have replacement cost coverage. For example, a policy summary might identify replacement cost for the building while a separate endorsement changes how wind or hail damage to the roof covering is valued. Read the complete contract rather than relying on the largest heading on the declarations page.
For planning purposes, separate three questions. Is this damage covered? What construction is needed to address the damage? How does the policy value the covered work? A disagreement about one question does not automatically answer the other two. A necessary roof replacement may still involve owner expenses that the insurance contract does not cover.
ACV only and an initial ACV payment are different
Under an ACV-only settlement provision, depreciation generally remains part of the owner's financial exposure. Replacing the roof does not automatically create a right to recover that depreciation. Under replacement cost coverage, an insurer may initially pay an ACV amount and release eligible withheld depreciation after the policy's replacement requirements are satisfied. Conditions, limits, and deadlines apply. [2]
Ask the carrier to identify the specific provision governing your roof and explain whether the listed depreciation is recoverable. Keep that written response with the estimate. Do not assume that a line labeled depreciation means a second check is coming, and do not assume that an initial ACV check proves your policy is ACV-only.
A scheduled roof payment deserves separate review
Some roof endorsements use a payment schedule or other valuation formula. That arrangement may have a similar financial effect to ACV coverage, but the calculation can differ. Ask whether payment depends on the roof's age, material, scheduled percentage, condition, or another stated factor. A contractor's estimate cannot replace that explanation.
Step 1 Collect the complete policy and claim documents
Create one folder for the policy in effect on the date of loss. Include the declarations page, coverage forms, endorsements, renewal notices, deductible schedule, and any separate wind or hail policy. If you only have a summary, request the full policy from the carrier or agent.
Add the claim number, reported date of loss, adjuster's contact details, payment letters, estimates, inspection reports, and correspondence. Save documents with descriptive filenames and dates. A revised estimate should be retained alongside the earlier version so you can see what changed rather than accidentally replacing the history of the claim.
For a commercial property, confirm that the correct location and building are listed. A multi-building complex may have different roof ages, values, or deductibles by structure. Check that the estimate identifies the right roof area and that the person coordinating the claim has authority to approve construction spending for the property.
If the building is leased, review who maintains the roof and who holds the insurance. A tenant's business policy and the owner's building policy can serve different purposes. Resolve responsibility early so that contractor scheduling, access, and invoices go to the right decision-maker. This is particularly useful when a leak affects several occupied spaces.
Step 2 Confirm the exact roof settlement basis
Contact the carrier or agent and ask for a written explanation of the roof valuation terms. Use specific questions: Is the roof covering subject to ACV settlement? Does that treatment apply to every covered cause of loss or only selected events? Are other roof components treated differently? Is any withheld depreciation recoverable?
Ask the responder to identify the relevant form name, endorsement number, and paragraph. This makes the answer easier to compare with the actual contract. If the explanation appears inconsistent with the policy, seek qualified coverage advice before building a budget around an assumption.
Check whether the carrier's estimate separates roof covering, insulation, flashing, interior damage, and other property. Do not assume the valuation method for one category controls every category. Similarly, a condition affecting the roof does not necessarily determine payment for a damaged ceiling, business contents, or another claimed item.
Commercial owners should also ask about limits, sublimits, coinsurance provisions, and any applicable valuation requirements. These can affect payment beyond depreciation. The useful outcome of this step is a written explanation of the rules being applied, not merely confirmation that the insurer has issued a check.
Step 3 Identify the cause and extent of the observed damage
Arrange a roof evaluation that records conditions without treating every defect as storm damage. A professional inspection should distinguish observed damage from ordinary aging, maintenance needs, prior repairs, installation concerns, and conditions requiring further investigation. The inspector should explain what can be concluded from the evidence and what remains uncertain.
For a commercial membrane roof, relevant observations may include open seams, punctures, damaged flashing, drainage problems, and moisture indicators. For a metal roof, inspect panels, fasteners, seams, penetrations, and associated details. The presence of a mark or a leak alone does not establish how it occurred or whether the policy covers it.
Ask for photographs with enough context to identify location. A close-up should connect to an overview, roof plan, or labeled section. Record which areas were accessible and any limitations caused by weather, occupied equipment areas, or unsafe conditions. A report that acknowledges limits is more useful than a confident conclusion without supporting observations.
Where testing is appropriate, discuss the method, purpose, permissions, and cost before proceeding. Moisture surveys or controlled openings can help define construction needs, but no single test automatically proves coverage. Keep the technical findings separate from assumptions about what the insurance company must pay.
Step 4 Protect the property while preserving evidence
Address active leaks and immediate hazards promptly. Protect inventory, equipment, and occupied spaces where you can do so safely. Keep staff and tenants away from affected electrical systems or unstable ceilings. Property owners should avoid walking an unfamiliar or damaged roof to take their own photographs.
Document conditions before temporary repairs when it is safe and practical. Record the reason for the emergency work, the affected area, the materials used, and the date. Retain invoices and receipts. Notify the carrier about the work and ask what documentation it needs. Emergency expenses are subject to the policy rather than automatic reimbursement.
Coordinate temporary measures with the future repair plan. A patch that stops today's leak may still need to be removed or incorporated properly during permanent work. Ask the roofing contractor how the temporary treatment affects inspection, compatibility, and later installation.
Keep a record of follow-up observations. If a leak resumes during another rainfall, note the date and location without guessing the cause. Useful records explain what happened and what action was taken. They should not turn an uncertain condition into a claim of damage that no one has verified.
Step 5 Read the insurer estimate line by line
Start with the estimate's summary, then examine the details. Identify the replacement cost amount, depreciation, ACV amount, deductible, prior payments, and net amount currently payable. Look for notes about recoverable depreciation, payment conditions, excluded items, or items awaiting additional information.
Do not add the deductible twice when calculating your budget. Some summaries already subtract it in the net payment. Likewise, an ACV subtotal may represent the amount before the deductible rather than the check you will receive. Ask for clarification if the labels are unclear.
Compare quantities with the roof inspection. Check roof area, flashing lengths, penetrations, drains, removal assumptions, insulation, and other necessary components. An estimate can be mathematically accurate while describing an incomplete construction scope. Conversely, a contractor's broader proposal may include upgrades that were never part of the covered loss.
Maintain a simple issue list: estimate location, question, supporting evidence, and requested clarification. This is more effective than sending a general statement that the payment is too low. You are trying to identify a specific difference that can be examined and answered.
Step 6 Check how depreciation was calculated
Ask what information supports the assigned roof age and condition. Installation invoices, permits, warranty records, earlier inspection reports, and maintenance records may help correct factual errors. If the property changed hands, look for records from the seller or prior manager instead of estimating the age from memory.
Review whether the estimate applies the same depreciation treatment across unlike components. A recently replaced flashing detail and an older roof surface may warrant questions about the assumptions being used. Raising a question does not establish that the calculation is wrong; it identifies an item that needs explanation.
Avoid treating a manufacturer's warranty term as proof of a required depreciation schedule. Warranty coverage and insurance valuation address different matters. Ask the insurer how its calculation follows the policy rather than insisting that a product's advertised lifespan controls the claim.
If a material or labor depreciation issue becomes a legal interpretation dispute, get qualified advice based on the actual contract and applicable law. There is no universal percentage that this article can supply for every Texas roof. A credible review focuses on the specific estimate, facts, and policy language.
Step 7 Calculate your deductible in dollars
A deductible stated as a percentage can produce a larger expense than owners expect. Confirm what value the percentage is applied to. It may be based on the insured building value or another amount defined in the policy, rather than on the repair estimate itself. Ask for the dollar calculation in writing. [3]
For example, if a hypothetical policy uses a two percent deductible based on a $1 million building limit, the deductible would be $20,000. That arithmetic does not establish the deductible on your policy. A different base, minimum, per-building arrangement, or provision could change the result.
Check whether the event falls under a separate wind or hail deductible. Do not assume that the general deductible on the first page governs every roof claim. For a property with several buildings, ask whether a deductible applies separately by building, by occurrence, or under another defined arrangement.
Record the deductible beside the insurer's net payment so you can reconcile both figures with the final construction cost. The deductible is only one part of your contribution. Nonrecoverable depreciation, excluded work, upgrades, and other policy adjustments may create additional owner expenses.
Step 8 Build a realistic replacement budget
Illustration Reviewing roofing scope and project costs
Use the actual proposed construction price, not only the carrier's replacement cost estimate, as the starting point for your funding plan. Then subtract confirmed net insurance payments that are available for that project. The remainder is the owner's funding requirement, subject to any later approved payment or documented cost change.
Separate confirmed funds from conditional funds. An issued payment is different from an estimate of possible depreciation recovery or an unresolved supplement. Check whether a lender, mortgage company, or other payee must endorse the check before the money becomes available. A payment on paper may not yet be spendable.
Include a defined process for unforeseen conditions. The contract should explain how additional deck repairs or other hidden work will be documented, priced, and authorized. A reserve can help you plan, but it should not become a blank permission for unreviewed charges.
Before committing, consider when each payment is due. A project may require a deposit, progress payment, and final balance at different stages. Match those dates to available funds, rather than assuming the insurer's next payment will arrive in time to satisfy the contract.
Hypothetical ACV only roof settlement
Assume covered replacement cost is $100,000, depreciation is $35,000, and the applicable deductible is $10,000. The simplified ACV is $65,000, and the simplified net payment is $55,000. If the contractor's price is $100,000, the owner's contribution is $45,000.
That contribution includes the $35,000 depreciation and $10,000 deductible. This illustration assumes no other limits, exclusions, prior payments, or adjustments. It is an arithmetic example, not a Texas price estimate, claim prediction, or depreciation standard.
If the contractor's price were $108,000 while the confirmed payment remained $55,000, the owner would need $53,000. The extra $8,000 deserves a scope review, but it does not automatically become payable insurance money. Determine why the estimates differ before assuming who will fund the difference.
Step 9 Compare roofing proposals on the same scope
Ask each contractor to identify the proposed roof assembly and the work included. A low total means little if one proposal includes removal and another assumes a recover installation. The same concern applies to insulation, flashing replacement, drainage details, substrate preparation, access equipment, and disposal.
For a warehouse or retail center, review how work will affect deliveries, parking, tenant entrances, rooftop equipment, and business hours. An estimate that ignores access restrictions may become more expensive or disruptive after work begins. Construction planning should reflect the building's actual use.
Separate necessary repairs from optional upgrades. A thicker membrane, enhanced warranty, additional insulation, or aesthetic change may have value, but the owner should understand the cost and reason. Do not describe an elective improvement as covered damage simply because it is being installed during an insurance project.
Ask about warranty terms, exclusions, maintenance requirements, and who provides the coverage. A workmanship warranty and a manufacturer's warranty can have different responsibilities. Obtain the actual terms and required closeout documents rather than relying on a verbal statement that the roof is guaranteed.
Step 10 Choose repair restoration or replacement on technical grounds
An ACV payment can create pressure to select the cheapest possible work. Start instead with what the roof needs. Ask whether a targeted repair can reliably address the damaged area, whether the existing assembly is suitable for restoration, or whether replacement is necessary based on documented conditions.
A coating should not be proposed as a universal answer to a tight budget. Compatibility, moisture, substrate condition, seams, drainage, and preparation all matter. Applying a coating over unresolved problems can leave the owner with ongoing leaks and another major expense.
For phased work, identify what the first phase accomplishes and what remains. Define temporary protection, interfaces between old and new areas, future mobilization costs, and the expected limitations. A phased plan is useful only when the owner understands its practical consequences.
Keep insurance valuation separate from construction suitability. Receiving a smaller payment does not make an unsafe or technically unsuitable repair acceptable. At the same time, full replacement should be supported by the roof's condition and the proposed assembly, rather than a desire to match a particular claim amount.
Step 11 Address code related costs separately
Ask the contractor to explain applicable construction requirements for the proposed work. Relevant issues may involve energy performance, attachment, drainage, deck conditions, or other local requirements. Request the specific requirement and how it affects the scope, rather than accepting a general line labeled code upgrades.
Code compliance and insurance coverage are separate questions. Ordinance or law coverage may address certain additional expenses, but the applicable limits and conditions need review. An ACV roof provision does not automatically answer how those expenses are handled. [1]
If there is uncertainty about what the local authority requires, resolve it before finalizing the proposal when possible. Document the answer and account for it in the contract. This reduces the chance that a required item appears later as an unexpected charge or causes a delay during inspection.
Step 12 Submit documented scope differences for review
If the contractor identifies necessary work missing from the carrier's estimate, obtain a clear itemized explanation. Useful support can include photographs, measurements, material details, and a description of why the item is required for the proposed repair. Keep requested changes tied to facts.
You or an authorized claim representative can present the material to the insurer and request a written response. A roofing contractor can supply construction information, but Texas restricts contractors from acting as public adjusters on properties where they provide or may provide contracting services. Showtime Exteriors should not be presented as your claim negotiator or coverage representative. [4]
A supplement request does not convert ACV-only coverage into replacement cost coverage. Even an accepted scope change may be subject to depreciation, deductibles, limits, or other adjustments. Recalculate your budget using the revised net payment rather than treating the added replacement cost as available cash.
Step 13 Resolve disagreements before missing deadlines
If you disagree with the estimate, explain the specific issue and request reconsideration with supporting documents. Ask which items the carrier accepts, rejects, or needs more information to review. Retain every response and updated estimate. A written record makes unresolved questions easier to track.
For a valuation disagreement, ask a qualified advisor whether the policy's appraisal provision applies and what costs, conditions, or deadlines are involved. Appraisal does not automatically resolve every coverage dispute. Other options may include a licensed public adjuster, legal advice, or a complaint, depending on the issue. [5, 6]
Do not use a generic internet deadline as your claim calendar. Notice requirements, proof-of-loss requests, replacement conditions, appraisal procedures, and legal deadlines can differ. Obtain the actual applicable dates and seek advice promptly if a response or decision remains unresolved. Waiting for a contractor's availability should not be assumed to preserve a deadline.
Step 14 Sign a clear contract and document completion
The construction agreement should state the scope, price, payment schedule, anticipated timing, change-order process, and warranty responsibilities. Identify who coordinates permits, protects occupied spaces, and handles debris. Include the process for weather interruptions and unexpected conditions.
Texas prohibits contractors from offering to waive, rebate, or absorb a property insurance deductible. Be cautious about proposals that disguise it through inflated invoices or unexplained credits. The budget should show your actual contribution and truthful project costs. [4]
During work, retain progress photographs and approved changes. At completion, collect final invoices, payment receipts, inspection documentation, warranty materials, and a summary of what was installed. For replacement cost claims with eligible recoverable depreciation, ask the carrier which completion documents are required. An ACV-only claim does not automatically gain a depreciation payment because the roof is finished.
Before your next policy renewal
Use the completed project to update your roof records. Keep the installation date, assembly description, permits, warranty, and maintenance plan together. Share accurate roof information with your insurance agent and ask how it affects available coverage options. A new roof does not automatically change your current policy terms.
Compare renewal proposals using the roof settlement basis, deductible, exclusions, limits, and premium together. A lower annual premium may shift more replacement expense to you after a loss. Ask for an explanation of any roof endorsement changes and obtain sample payment illustrations based on clearly stated assumptions.
For commercial properties, consider the cash reserve needed for several roofs or a major storm event. Review that exposure with the appropriate financial and insurance advisors. A policy choice is easier to evaluate when you understand both the annual cost and the amount the business might need to fund after damage.
A short checklist before work begins
Before signing, put the essential numbers and decisions on a single working sheet. Record the contract price, confirmed net insurance payment, your available cash, and any conditional payment that still requires action. Add the agreed start date and the person authorized to approve changes. This sheet should match the contract rather than replace it.
Check that you have received the roof inspection, reviewed the proposed assembly, and asked how hidden conditions will be handled. Confirm the payment milestones and the process for documenting completed work. If a key question remains unanswered, identify who will answer it and when, instead of leaving it as an informal promise.
For an occupied commercial property, give the contractor one contact for access and one clear process for communicating with tenants. Discuss loading areas, rooftop equipment, noise, odors, and weather protection. A sound funding plan and a workable construction schedule belong together. Both help keep a roof project manageable from the first day through final closeout.
Frequently asked questions
Does an ACV policy cover hail damage
It may, if hail is a covered cause of loss and the claim satisfies the policy requirements. ACV addresses valuation; it does not establish coverage for an event. Review the wind and hail provisions and any separate policy applicable to the location.
Can I recover depreciation after replacing my roof
Possibly under replacement cost coverage with eligible recoverable depreciation and satisfied conditions. Under an ACV-only roof provision, depreciation generally is not recovered simply because replacement occurs. Ask the insurer to identify the controlling language and explain your specific settlement.
Can a supplement increase an ACV payment
An accepted correction to covered scope, quantities, or valuation may change the payment. Applicable depreciation and other adjustments can still apply. A supplement is a request for review, not a promise that the full contractor price will be paid.
Should I replace my roof with the insurer check alone
Only if that funding supports the agreed work and your obligations. Compare the contractor price with confirmed available insurance funds and your contribution. Do not omit necessary work solely to make the contract equal the check.
Who can help me understand my roof options
A roofing contractor can inspect conditions and explain construction alternatives. Your agent or insurer can explain coverage; a licensed public adjuster or attorney may assist with representation or disputes when appropriate. Choose help based on the question you need answered.
Plan your Texas roof project with Showtime Exteriors
Before you commit to a roof repair or replacement, make sure the construction scope and budget match the property's needs. Showtime Exteriors can evaluate commercial roof conditions, explain practical roofing options, and provide construction information for your planning.
Call 817 400 ROOF 7663 or visit https://www.showtimeexteriors.com/ to discuss your property. Bring your inspection records, current estimate, and questions about the work so the conversation can focus on the roof, the proposed assembly, and the project cost.
Insurance terms vary. This guide provides general education and project planning suggestions rather than a determination of coverage or legal advice. Illustrations are hypothetical; photographs are generated editorial images rather than documented claim evidence.
Sources and further reading
[1] Texas Department of Insurance Commercial property insurance guide https://www.tdi.texas.gov/pubs/consumer/cb021.html
[2] Texas Department of Insurance Home insurance guide https://www.tdi.texas.gov/pubs/consumer/cb025.html
[3] Texas Department of Insurance What to know about deductibles https://www.tdi.texas.gov/tips/deductibles.html
[4] Texas Department of Insurance Roofing and insurance Know the law https://www.tdi.texas.gov/consumer/storms/roofing-and-insurance-know-the-law.html
[5] Texas Department of Insurance What if my insurance is not paying enough https://www.tdi.texas.gov/tips/disagree.html
[6] Texas Department of Insurance Public adjusters What to know before you hire one https://www.tdi.texas.gov/tips/public-adjusters.html














